Services
METAL FORMING DIVISION
Precision Press & Stamping
Progressive Die Stamping
Multi-stage high-speed stamping that forms complex part geometries in a single press cycle. Supports mass production of brackets, reinforcements, and structural shells with consistent dimensional repeatability.
Transfer Press Technology
Large-panel forming with automated multi-station part transfer. Ideal for outer door panels, hood assemblies, and quarter panels requiring Class-A surface accuracy at high volume.
Blanking & Deep Drawing
Precision sheet metal blanking and deep-draw forming for cylindrical, box-form, and complex profile components including fuel tank housings, oil pans, and structural shells.
Closure Parts (Door Panel)
Body Parts (Dash Assembly)
High Tensile Parts
Motorcycle Parts
Aluminum Parts
Electric Car Parts
CMM Dimensional Inspection
Full 3D coordinate measuring against CAD master data. 100% first-off verification and periodic sampling across all critical datums and feature positions.
Class-A Surface Quality Audit
Wave-scan and visual defect inspection to automotive Class-A surface standard. Zero visible defect acceptance applied to all exterior panel surfaces.
Tensile & Hardness Testing
In-house material verification: yield strength, UTS, elongation, and Vickers hardness per incoming steel coil standard to confirm material grade conformance.
CONSTRUCTION EQUIPMENT DIVISION
Heavy Equipment Components
Heavy-Gauge Metal Stamping
High-tonnage pressing of 4–20mm structural steel for excavator booms, arms, and undercarriage plates. Tight flatness and profile tolerances maintained under the forming pressures required for load-bearing components.
Robotic MIG / MAG Welding
Multi-pass automated welding for structural assemblies with full weld penetration and seam traceability. Robot path programming ensures consistent weld profile, throat dimension, and inter-pass temperature control.
Heat Treatment & Surface Protection
Post-weld stress relief, controlled shot blasting to Sa 2.5 standard, and epoxy-primer or powder-coat systems for extended corrosion protection and structural integrity in harsh field environments.
Laser Machine
2D/3D laser cutting with micron-level precision — complex shapes and multi-angle cuts in a single pass. Clean, burr-free edges, fully automated for consistent quality every time.
Door Cover
Bonnet
Engine Cover Components
Grease Baht
Counterweight
Engine Hood
Structural Load & Fatigue Simulation
Proof-load and cyclic fatigue testing to validate component performance against OEM life-cycle targets under representative operational load spectra and duty cycles.
NDT Weld Inspection
Magnetic particle (MPI) and ultrasonic testing (UT) for internal weld discontinuity detection — 100% coverage on all primary structural joints, sampling on secondary weld features.
Coating Adhesion & Salt Spray
Cross-cut adhesion test and continuous neutral salt spray exposure to verify protective coating system longevity and corrosion resistance beyond the minimum field-life requirement.
PLASTIC FORMING DIVISION
Vacuum Thermoforming
Single-Sheet Vacuum Forming
Precision thermoplastic sheet heating and vacuum-draw over custom aluminum tooling. Achieves tight dimensional repeatability and controlled wall thickness distribution across large, complex panel geometries.
Twin-Sheet Thermoforming
Simultaneous dual-sheet forming and in-process fusion bonding to produce rigid hollow structural components — delivering superior stiffness-to-weight ratio versus single-layer or injection-molded alternatives.
In-Mold Decoration (IMD)
Surface grain, texture pattern, and graphic integration during the forming cycle — eliminating secondary coating operations and reducing total part count while maintaining OEM finish standards.
Door Panel
Rear Bumper
Headliner Substrate
Front Skirt
Side Skirt
Rear Skirt
Wall Thickness Mapping
Ultrasonic measurement at a defined grid of check-points across the formed panel to verify uniform material draw-down and identify thin-wall zones before part approval.
Pull-Force & Bond Integrity
Peel and shear adhesion testing for substrate-skin laminate bonds under temperature and humidity cycling per OEM-defined test sequences and environmental exposure conditions.
Heat Deflection & UV Aging
Accelerated UV weathering and thermal cycling to validate dimensional stability, color retention, and surface integrity across the designed service life of the vehicle.
Trust and Worth
Our Clients
